学习啦>学习电脑>电脑安全>防火墙知识>

h3c防火墙如何设置adsl

林辉分享

  想要用h3c防火墙去设置adsl,该怎么办呢?下面由学习啦小编给你做出详细的h3c防火墙设置adsl方法介绍!希望对你有帮助!

  h3c防火墙设置adsl方法一:

  1. firewall packet-filter default permit 更改默认包过滤规则为允许

  2.就是你的d0端口下的配置问题。是否正确如下

  interface Dialer1

  link-protocol ppp

  ppp pap local-user ADSL用户名password simple密码

  mtu 1492

  tcp mss 1200

  ip address ppp-negotiate

  dialer user mypppoe

  dialer-group 1

  dialer bundle 1

  nat outbound 3100

  3.物理端口绑定错误。如下:

  #

  interface Ethernet0/4

  pppoe-client dial-bundle-number 1

  4.d0口要加入到安全域里。我估计你是这个问题。

  #

  firewall zone untrust

  add interface Ethernet0/4

  add interface Dialer0

  h3c防火墙设置adsl方法二:

  首先创建一个拨号连接接口、封装一下协议、然后设置用户名和密码,如下:

  拨号连接接口为dialer1,拨号的用户名为:uesr1,密码为:abc123.

  interface Dialer1

  link-protocol ppp

  ppp chap user user1

  ppp chap password cipher abc123

  ppp pap local-user user1 password cipher abc123

  ip address ppp-negotiate

  dialer user user1

  dialer-group 1

  dialer bundle 1

  然后把拨号连接口应用在路由器的外网端口上面:

  interface GigabitEthernet0/1

  pppoe-client dial-bundle-number 1

  然后写一条默认路由指向拨号连接口出去:

  ip route-static 0.0.0.0 0.0.0.0 Dialer1

  h3c防火墙设置adsl方法三:

  #

  sysname H3C

  #

  ike local-name NO_3

  #

  firewall packet-filter enable

  firewall packet-filter default permit

  #

  insulate

  #

  dialer-rule 1 ip permit

  #

  firewall statistic system enable

  #

  radius scheme system

  server-type extended

  #

  domain system

  #

  local-user admin

  password simple admin

  service-type telnet

  level 3

  #

  ike peer 1

  exchange-mode aggressive

  pre-shared-key h3c123

  id-type name

  remote-name CENTER

  remote-address X.X.X.X

  nat traversal

  #

  ipsec proposal 1

  #

  ipsec policy 1 isakmp

  security acl 3000

  ike-peer 1

  proposal 1

  #

  acl number 3000

  rule 0 permit ip source 172.16.0.0 0.0.255.255 destination 192.168.0.0 0.0.255.255

  acl number 3100

  rule 0 deny ip source 172.16.3.0 0.0.0.255 destination 192.168.0.0 0.0.0.255

  rule 10 permit ip source 172.16.3.0 0.0.0.255

  #

  interface Aux0

  async mode flow

  #

  interface Dialer1

  link-protocol ppp

  ppp pap local-user 宽带账号 password simple 宽带密码

  mtu 1492

  tcp mss 1024

  ip address ppp-negotiate

  dialer user mypppoe

  dialer user 1

  dialer-group 1

  dialer bundle 1

  nat outbound 3100

  ipsec policy

  #

  interface Ethernet0/0

  ip address 172.16.3.254 255.255.255.0

  #

  interface Ethernet0/1

  #

  interface Ethernet0/2

  #

  interface Ethernet0/3

  #

  interface Ethernet0/4

  pppoe-client dial-bundle-number 1

  #

  interface Encrypt1/0

  #

  interface NULL0

  #

  firewall zone local

  set priority 100

  #

  firewall zone trust

  add interface Ethernet0/0

  add interface Ethernet0/1

  add interface Ethernet0/2

  add interface Ethernet0/3

  set priority 85

  #

  firewall zone untrust

  add interface Ethernet0/4

  add interface Dialer1

  set priority 5

  #

  firewall zone DMZ

  set priority 50

  #

  firewall interzone local trust

  #

  firewall interzone local untrust

  #

  firewall interzone local DMZ

  #

  firewall interzone trust untrust

  #

  firewall interzone trust DMZ

  #

  firewall interzone DMZ untrust

  #

  FTP server enable

  #

  ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60

  #

  user-interface con 0

  user-interface aux 0

  user-interface vty 0 4

  authentication-mode scheme

  #

  return

  我的H3C F100-C,配置ADSL后,一直不能联网,请各位高手给看看

  DIS INTER DIALER后的结果如下

  Dialer1 current state :DOWN

  Line protocol current state :DOWN

  Description : Dialer1 Interface

  The Maximum Transmit Unit is 1492, Hold timer is 10(sec)

  Internet protocol processing : disabled

  Link layer protocol is PPP

  LCP initial

  Physical is Dialer, baudrate: 100000000 bps

  Output queue : (Urgent queuing : Size/Length/Discards) 0/50/0

  Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0

  Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0

  Last 300 seconds input: 0 bytes/sec 0 packets/sec

  Last 300 seconds output: 0 bytes/sec 0 packets/sec

  0 packets input, 0 bytes, 0 drops

  0 packets output, 0 bytes, 0 drops

  看了“h3c防火墙如何设置adsl ”文章的还看了:

1.h3c防火墙如何设置

2.h3c防火墙怎么样设置

3.h3c防火墙端口如何设置

4.h3c防火墙用户名密码怎么样设置

5.h3c防火墙常用命令

6.h3c防火墙如何恢复出厂

7.h3c防火墙主要作用介是什么

    775859